The /5 centerstand tang
In a message dated 8/21/97 1:59:27 AM, you wrote:
<<Can someone with an original tang on their /5 center stand give me the demensions so I can replace mine. IE length before bend, length after bend, diameter of the tang, was it round or multi sided like a hexygon. Also what is the angle of the bend is it vertical or horizontal when the stand is down. Thanks, Al>>
I have an original 1973 R75/5 and following are my measurements of tang.
Diameter - .350" Round
The tang has two bends, both are 90 degrees.
| | 2 1/4" | | |________________ 2 3/4" | | 1/2"
The angle of the tang from the floor forward of the center stand is 58 degrees.
The 1/2" leg is welded to the center stand and the 2 1/4" leg is for foot.
I hope this poor description can be of some help to you.